Inerting and blanketing
Keeping tanks, vessels and lines under a nitrogen atmosphere during maintenance, storage or catalyst handling.
Nitrogen purging services in Abqaiq for crude oil processing facilities, gas-oil separation plants and other sites across Abqaiq. We purge, inert, dry and leak test systems with nitrogen and confirm every vent against your target.
Nitrogen Purging in Abqaiq
Abqaiq is home to one of the world's largest crude oil processing and stabilization facilities, surrounded by gas-oil separation plants, pipelines and pumping stations. It is an inland desert location, so crews deal with extreme summer heat and blowing sand, and work is planned around facilities that are critical to national crude supply and cannot be taken out of service lightly.
Crude stabilization and gas separation units in Abqaiq contain hydrocarbons and associated gas that must be removed before maintenance and before restart. Nitrogen purging clears these systems to a safe level and, because these units are critical to supply, we size nitrogen supply generously so purging never delays the return to service.
Our nitrogen purging services in Abqaiq use the same calibrated equipment, procedures and reporting we use on sites across the Kingdom.
Purging usually follows hydrotesting, when lines have been drained and need drying, and joints that leak during a nitrogen leak test are corrected straight away by bolt torquing.
What we offer
Keeping tanks, vessels and lines under a nitrogen atmosphere during maintenance, storage or catalyst handling.
Pressurising systems with nitrogen to check flanged joints and connections before start-up, with leaks fixed by our bolting crew.
Purge plans, monitoring logs and completion certificates for each system, ready for your hand-over files.
Our bolting crews mobilize with calibrated equipment across Saudi Arabia, 24 hours a day.
FAQ
Yes. We size nitrogen supply and vaporising capacity for the volume and time available, so purging and restart are not held up by gas supply.
We schedule heavy work for cooler hours where the site allows, rotate crews, provide shade and water, and protect machines and instruments from sand and heat so work continues safely through the summer.
The acceptance target is agreed before the job, for example a maximum oxygen or hydrocarbon level or a minimum dew point. We measure at every vent with calibrated instruments and record when each point meets it.
Other locations
We provide nitrogen purging, inerting and drying at plants, pipelines and project sites across the Kingdom. Choose a location for local details.
Request a quote
Send us your joint details and schedule, and then a bolting specialist will reply with a recommended method and a quotation.
Eastern Province
Kingdom of Saudi Arabia
Sun–Thu, 7:00 AM – 5:00 PM · Emergency call-out 24/7
We aim to respond within one working day.