Skip to content

Bolt torquing services in Saudi Arabia, with 24/7 emergency call-out

Purging, inerting and drying in Riyadh

Nitrogen Purging Services in Riyadh

Nitrogen purging services in Riyadh for Riyadh Second & Third Industrial Cities, power generation plants and other sites across Riyadh. We purge, inert, dry and leak test systems with nitrogen and confirm every vent against your target.

Nitrogen Purging in Riyadh

Nitrogen Purging Services in Riyadh

Riyadh, the capital, is the Kingdom's largest manufacturing centre, with the Second and Third Industrial Cities, large power generation plants, and the water transmission systems that bring desalinated water inland from the coast. Major construction and infrastructure projects run continuously, and the dry inland climate brings extreme summer heat and dust.

In Riyadh, nitrogen purging and drying are most often needed for fuel gas systems at power plants, process systems in the industrial cities, and new pipework before commissioning. We dry systems after hydrotesting to the dew point your commissioning procedure requires.

Our nitrogen purging services in Riyadh use the same calibrated equipment, procedures and reporting we use on sites across the Kingdom.

Purging usually follows hydrotesting, when lines have been drained and need drying, and joints that leak during a nitrogen leak test are corrected straight away by bolt torquing.

See our step-by-step process for nitrogen purging

What we offer

Nitrogen purging services in Riyadh

Inerting and blanketing

Keeping tanks, vessels and lines under a nitrogen atmosphere during maintenance, storage or catalyst handling.

Nitrogen leak testing

Pressurising systems with nitrogen to check flanged joints and connections before start-up, with leaks fixed by our bolting crew.

Procedures and records

Purge plans, monitoring logs and completion certificates for each system, ready for your hand-over files.

Leaking flange or tight shutdown window?

Our bolting crews mobilize with calibrated equipment across Saudi Arabia, 24 hours a day.

FAQ

Nitrogen purging services in Riyadh: FAQ

Do you dry new pipework with nitrogen before commissioning in Riyadh?

Yes. After hydrotesting we dry lines with nitrogen to the dew point in your commissioning procedure and record the readings at each test point.

Do you work on construction projects as well as plants in Riyadh?

Yes. In Riyadh we support both operating plants and construction projects, including utility, infrastructure and building services piping, working to the main contractor's schedule and procedures.

Can you leak test the system with nitrogen?

Yes. We pressurise the system with nitrogen, check flanges and connections for leaks, and our bolting technicians can re-torque or remake leaking joints immediately.

Request a quote

Request nitrogen purging services in Riyadh

Send us your joint details and schedule, and then a bolting specialist will reply with a recommended method and a quotation.

We aim to respond within one working day.

Request a quote for bolt torquing services

Scroll to Top