Skip to content

Bolt torquing services in Saudi Arabia, with 24/7 emergency call-out

Spark-free pipe cutting in Abqaiq

Pipe Cold Cutting Services in Abqaiq

Pipe cold cutting services in Abqaiq for crude oil processing facilities, gas-oil separation plants and other sites across Abqaiq. Our crews cut and bevel pipe on site with split-frame machines, with no flame, no sparks and no heat-affected zone.

Request a quote+966506058927

Pipe cold cutting in Abqaiq

Pipe Cold Cutting Services in Abqaiq

Abqaiq is home to one of the world's largest crude oil processing and stabilization facilities, surrounded by gas-oil separation plants, pipelines and pumping stations. It is an inland desert location, so crews deal with extreme summer heat and blowing sand, and work is planned around facilities that are critical to national crude supply and cannot be taken out of service lightly.

Pipework at Abqaiq's processing plants and gas-oil separation plants carries crude and associated gas, so hot work near operating equipment is tightly restricted. Cold cutting lets lines be cut out and replaced during short planned outages with no ignition source, which is essential on facilities this critical to supply.

Our pipe cold cutting services in Abqaiq use the same calibrated equipment, procedures and reporting we use on sites across the Kingdom.

Cold cutting is usually one step in a larger job. Once new spools are welded in, we can prove them with hydrotesting, dry and inert them with nitrogen purging, and make up the flanged joints with bolt torquing.

See our step-by-step process for pipe cold cutting

What we offer

Pipe cold cutting services in Abqaiq

Weld-end bevelling

Standard and compound bevels, J-preps and land machined to your welding procedure in the same set-up as the cut.

Diamond wire and saw cutting

For large-diameter, thick-walled and multi-layer sections, and for cutting vessels and structures during decommissioning.

All common pipe materials

Carbon steel, stainless, duplex, alloy and clad pipe, with tooling, speeds and coolant chosen for each material.

More industrial services in Abqaiq

Leaking flange or tight shutdown window?

Our bolting crews mobilize with calibrated equipment across Saudi Arabia, 24 hours a day.

+966506058927 Request a quote

FAQ

Pipe cold cutting services in Abqaiq: FAQ

Is cold cutting suitable for crude processing facilities in Abqaiq?

Yes. Because cold cutting produces no sparks or flame, it is well suited to processing and separation plants where hot work near crude and gas is tightly restricted.

How do you manage summer heat on Abqaiq sites?

We schedule heavy work for cooler hours where the site allows, rotate crews, provide shade and water, and protect machines and instruments from sand and heat so work continues safely through the summer.

Does cold cutting remove the need for a hot-work permit?

The cutting itself produces no flame or sparks, so many sites treat it as cold work. The permit type is always decided by your site's permit-to-work system, and the line must still be isolated and gas-tested.

Other locations

Pipe cold cutting services by city

We provide pipe cold cutting at plants, pipelines and project sites across the Kingdom. Choose a location for local details.

All Pipe Cold Cutting Services in Saudi Arabia

Request a quote

Request pipe cold cutting services in Abqaiq

Send us your joint details and schedule, and then a bolting specialist will reply with a recommended method and a quotation.

We aim to respond within one working day.

Request a quote for bolt torquing services

Scroll to Top