Skip to content

Bolt torquing services in Saudi Arabia, with 24/7 emergency call-out

Spark-free cutting and bevelling

Pipe Cold Cutting Services in Saudi Arabia

Pipe cold cutting services in Saudi Arabia for live plants, shutdowns and project sites. Our crews cut and bevel pipe on site with split-frame machines, so there is no flame, no sparks and no heat-affected zone, and the pipe end comes off the machine ready for welding.

Request a quote+966506058927

Pipe cold cutting

Cold cutting that keeps hot work out of your plant

Cutting pipe with a grinder or torch in an operating facility means hot work, fire watch and a long permit process. Cold cutting removes the flame and the sparks from the job. A split-frame (clamshell) machine clamps around the pipe and a slow-turning tool bit machines through the wall, so the cut stays cool and the surrounding plant stays safe.

The same set-up cuts and bevels in one pass. Instead of a rough cut that still needs grinding, you get a square, clean end with the bevel your welding procedure calls for, which shortens fit-up and improves weld quality on tie-ins and modifications.

We use pneumatic or hydraulic drives so the machines can work in classified areas, and we plan each cut with your operations and safety teams. Our pipe cold cutting services in Saudi Arabia also include diamond wire and saw cutting for large-diameter or thick-walled lines, and for cutting through vessels and structures.

Cold cutting is usually one step in a larger job. Once new spools are welded in, we can prove them with hydrotesting, dry and inert them with nitrogen purging, and make up the flanged joints with bolt torquing.

What we offer

Pipe cold cutting services in Saudi Arabia

One mobilisation covers cutting, bevelling and end preparation, so the line is ready for the welders as soon as we leave.

Split-frame cold cutting

Clamshell machines mount around the pipe in place and cut through the wall without heat, sparks or distortion, even where access is tight.

Weld-end bevelling

Standard and compound bevels, J-preps and land machined to your welding procedure in the same set-up as the cut.

Counterboring and end facing

Internal counterbores and square end faces so mismatched wall thicknesses fit up correctly for welding.

Diamond wire and saw cutting

For large-diameter, thick-walled and multi-layer sections, and for cutting vessels and structures during decommissioning.

Cutting in hazardous areas

Air or hydraulic drives with no electrical ignition source, planned with your permit-to-work and gas-testing requirements.

All common pipe materials

Carbon steel, stainless, duplex, alloy and clad pipe, with tooling, speeds and coolant chosen for each material.

How we work

How we deliver pipe cold cutting services in Saudi Arabia

  1. Survey and plan

    We check pipe size, wall thickness, material, access and clearances, and agree cut locations and bevel details with your engineers.

  2. Isolation and permits

    The line is isolated, drained and gas-tested under your permit-to-work before any machine is mounted.

  3. Mount and align

    The split-frame machine is clamped around the pipe and trued so the cut is square to the pipe axis.

  4. Cut and bevel

    The tool bits feed through the wall slowly and cool, cutting and bevelling the pipe end in one operation.

  5. Check and hand over

    Bevel angle, land and end squareness are checked, the ends are protected, and the area is handed back clean.

Standards and safety

Safe, accurate cutting on operating sites

Our pipe cold cutting services in Saudi Arabia follow the same safety and quality controls on every job.

  • No flame or sparks from the cut itself, reducing hot-work exposure
  • Pneumatic or hydraulic drives suitable for classified areas
  • Bevels machined to your WPS, typically to ASME B16.25 weld-end geometry
  • Work carried out under the client's permit-to-work and gas-testing rules
  • Job safety analysis and toolbox talk before every cut
  • Work to client specifications, including Saudi Aramco and SABIC requirements

Our services

Our other industrial services in Saudi Arabia

Leaking flange or tight shutdown window?

Our bolting crews mobilize with calibrated equipment across Saudi Arabia, 24 hours a day.

+966506058927 Request a quote

FAQ

Pipe cold cutting services in Saudi Arabia: FAQ

What is pipe cold cutting?

Cold cutting is a machining method that cuts through pipe with a slowly rotating tool bit instead of a flame or abrasive disc. Because it produces no sparks and very little heat, it can be used in and around operating plant where hot work is restricted.

Does cold cutting remove the need for a hot-work permit?

The cutting itself produces no flame or sparks, so many sites treat it as cold work. The permit type is always decided by your site's permit-to-work system, and the line must still be isolated and gas-tested.

Can you bevel the pipe at the same time?

Yes. The split-frame machine can cut and bevel in one set-up, leaving a weld-ready end with the bevel angle and land required by your welding procedure.

Where in Saudi Arabia do you provide cold cutting?

We provide pipe cold cutting services in Saudi Arabia at plants, pipelines and project sites across the Kingdom, including Jubail, Dammam, Ras Tanura, Riyadh, Jeddah and Yanbu.

Where we serve

Pipe cold cutting services by city

We provide pipe cold cutting at plants, pipelines and project sites across the Kingdom. Choose a location for local details.

Request a quote

Request pipe cold cutting services in Saudi Arabia

Send us your joint details and schedule, and then a bolting specialist will reply with a recommended method and a quotation.

We aim to respond within one working day.

Request a quote for bolt torquing services

Scroll to Top