Skip to content

Bolt torquing services in Saudi Arabia, with 24/7 emergency call-out

Hydrostatic pressure testing in Haradh

Hydrotest Services in Haradh

Hydrotest services in Haradh for gas processing plants, oil production facilities and other sites across Haradh. We test piping, pipelines and vessels to the approved test pack, then drain, dry and reinstate the system.

Hydrotest in Haradh

Hydrotest Services in Haradh

Haradh lies at the southern end of the Ghawar field, deep in the desert, with one of the Kingdom's major gas processing plants, oil production facilities, and remote pipelines and stations. Distances, heat and limited local services mean jobs here succeed or fail on planning and self-sufficiency.

Hydrotests on remote Haradh pipelines and gas plant piping need water brought in, stored and disposed of properly. We plan the full sequence in advance and run the test with calibrated recorders, then drain and dry the system with air or nitrogen before restart.

Every job under our hydrotest services in Haradh starts with a site survey and a written method statement, and ends with a record of the work for your files.

Because leaks during a test usually come from flanged joints, every joint is made up by bolt torquing beforehand, and any flange damage is corrected by flange facing before the test is repeated.

See our step-by-step process for hydrotest

What we offer

Hydrotest services in Haradh

Hydrostatic testing

Testing piping, pipelines and equipment with water to the pressure and hold time set by the code and your specification.

Test pack preparation

Preparing and reviewing test packs, marked-up drawings, limits, blinds and vent and drain points before testing.

Draining and drying

Dewatering after the test and drying with air or nitrogen to the condition required before commissioning.

Leaking flange or tight shutdown window?

Our bolting crews mobilize with calibrated equipment across Saudi Arabia, 24 hours a day.

FAQ

Hydrotest services in Haradh: FAQ

Where does test water come from at Haradh?

Water source, storage and disposal are agreed with the site before testing, as part of the test plan, because remote locations rarely have test water on hand.

How do you plan work at remote Haradh facilities?

We confirm scope, drawings and site requirements before leaving, and travel with everything the job needs, including spare tooling, consumables and gaskets, so work is not stopped by a missing item.

Why use water instead of air?

Water is almost incompressible, so very little energy is stored in the system. If something fails during a hydrotest it leaks rather than bursting violently, which makes it much safer than a pneumatic test.

Request a quote

Request hydrotest services in Haradh

Send us your joint details and schedule, and then a bolting specialist will reply with a recommended method and a quotation.

We aim to respond within one working day.

Request a quote for bolt torquing services

Scroll to Top