Skip to content

Bolt torquing services in Saudi Arabia, with 24/7 emergency call-out

About us

About Bolt Torquing

Bolt Torquing is a bolt torquing company in Saudi Arabia that does one job and does it properly: controlled bolt torquing and hydraulic bolt tensioning for industrial plants, pipelines and projects across the Kingdom.

Request a quote+966506058927
Bolting technician in PPE applying controlled torque to a flange during industrial plant maintenance
Calibrated torque tool accuracy
±3%
Shutdown & emergency mobilization
24/7
Joints tagged and recorded
100%
Aligned bolting procedures
PCC-1

Who we are

A specialist bolt torquing company in Saudi Arabia

Bolted joints hold a plant together. When a flange leaks at start-up, the gasket is rarely to blame; far more often, the bolts were never loaded correctly. Bolt Torquing exists to solve exactly that problem, with crews and equipment dedicated to controlled bolting.

Our technicians work with calibrated hydraulic torque wrenches, bolt tensioners, pumps and torque multipliers. In addition, they follow joint-specific procedures aligned with ASME PCC-1 and your own engineering specifications, so every flange is tightened to a calculated load and recorded.

As a result, maintenance managers and procurement teams get one accountable partner for the whole bolted joint: from the bolt load calculation to the final tagged record, during routine maintenance, planned turnarounds and emergency call-outs.

Alongside bolt torquing, the same crews provide pipe cold cutting, flange facing, nitrogen purging and hydrotesting, so a modification can be cut, machined, bolted, tested and purged by one team.

What we stand for

The principles behind every joint we tighten

Six commitments our clients can hold us to, on every site and every shift.

Safety before speed

No joint is worth an incident. Therefore, we work under your permit-to-work system, with job safety analysis and hose integrity checks on every shift.

Measured, not guessed

Every tool is calibrated and every value is calculated, because an accurate bolt load is the difference between a tight joint and a leak.

Proof on paper

Each joint is tagged and recorded, so that your QA/QC team and inspectors can see exactly what was done, when and by whom.

Specialists only

Our people do bolting every day; as a result, they understand gasket behaviour, bolt preload and joint integrity in depth.

Ready when you are

Crews and equipment mobilize for planned shutdowns and, just as importantly, for emergency leaks at short notice.

Straight answers

We tell you which method your joint needs and why, rather than recommending the most expensive option.

How we work

How our bolt torquing services work, from survey to sign-off

Every job follows the same documented sequence, so that results are repeatable from the first flange to the last.

  1. Joint survey & data review

    First, we review drawings, bolt and gasket specifications, operating conditions and site access before mobilizing.

  2. Procedure & bolt load calculation

    Next, we calculate the target torque or tension values and the tightening sequence, and issue them for your approval.

  3. Preparation & alignment

    Then we clean and lubricate studs and nuts, replace damaged fasteners, and check flange alignment and gasket seating.

  4. Controlled tightening

    After that, bolts are tightened in a cross pattern over multiple passes with calibrated tools, under your permit-to-work system.

  5. Verification & tagging

    Afterwards, final values are verified and each joint is tagged with the applied load, date and technician.

  6. Joint record & handover

    Finally, you receive a complete joint record with tool calibration references, applied values and sign-off, ready for audit and start-up.

Leaking flange or tight shutdown window?

Our bolting crews mobilize with calibrated equipment across Saudi Arabia, 24 hours a day.

+966506058927 Request a quote

Our services

Industrial services we provide across Saudi Arabia

Bolting is our core, and the same crews provide cutting, machining, purging and pressure testing.

Service areas

Where We Serve

Our bolting crews work at plants, pipelines and project sites across the Kingdom. Choose a location for local service details.

Request a quote

Work with a specialist bolt torquing company

Send us your joint details and schedule, and then a bolting specialist will reply with a recommended method and a quotation.

We aim to respond within one working day.

Request a quote for bolt torquing services

Scroll to Top