Skip to content

Bolt torquing services in Saudi Arabia, with 24/7 emergency call-out

On-site flange machining in Al Ahsa

Flange Facing Services in Al Ahsa

Flange facing services in Al Ahsa for onshore oil and gas facilities, gas processing plants and other sites across Al Ahsa. We machine raised-face and RTJ flanges in place, restoring the gasket surface without removing pipework.

Request a quote+966506058927

Flange Facing in Al Ahsa

Flange Facing Services in Al Ahsa

Al Ahsa sits over part of the vast Ghawar oil field, with onshore production facilities, large gas processing plants and Al Ahsa Industrial City nearby. It is a spread-out inland region, so work often means travelling between remote wellsites, gathering stations and plants, in summer heat and dust.

Gas processing plants and production facilities around Al Ahsa run sour and wet gas service, which can pit flange faces and RTJ grooves over time. We re-machine raised faces and ring grooves on site, so joints seal reliably on restart without replacing high-rating flanges.

Every job under our flange facing services in Al Ahsa starts with a site survey and a written method statement, and ends with a record of the work for your files.

After refacing, joints are made up by bolt torquing to the calculated bolt load, and before start-up the system can be leak tested and inerted by nitrogen purging.

See our step-by-step process for flange facing

What we offer

Flange facing services in Al Ahsa

Heat exchanger and vessel flanges

Channel covers, girth flanges, nozzles and manways machined in place during shutdowns and turnarounds.

Weld preparation and removal

The same machines can face off welds, remove overlays and prepare flange faces and weld ends for repairs.

Machining plus bolt-up

We refit the gasket and tighten the joint with calibrated torque or tensioning tools, completing the repair in one visit.

More industrial services in Al Ahsa

Leaking flange or tight shutdown window?

Our bolting crews mobilize with calibrated equipment across Saudi Arabia, 24 hours a day.

+966506058927 Request a quote

FAQ

Flange facing services in Al Ahsa: FAQ

Do you re-cut RTJ grooves at Al Ahsa gas plants?

Yes. Ring-type joint grooves are re-machined to the correct profile and finish on site, which is common on high-pressure gas plant flanges.

Can you cover remote facilities around Al Ahsa?

Yes. We plan travel, accommodation and equipment logistics for remote facilities around Al Ahsa, and bring the consumables and spares needed so a job is not stopped by a missing part.

Do you also tighten the joint after facing?

Yes. Our flange facing services in Saudi Arabia include fitting the new gasket and tightening the joint with hydraulic torque wrenches or tensioners, so machining and bolt-up are completed by one crew.

Other locations

Flange facing services by city

We provide on-site flange facing at plants, pipelines and project sites across the Kingdom. Choose a location for local details.

All Flange Facing Services in Saudi Arabia

Request a quote

Request flange facing services in Al Ahsa

Send us your joint details and schedule, and then a bolting specialist will reply with a recommended method and a quotation.

We aim to respond within one working day.

Request a quote for bolt torquing services

Scroll to Top